# Eco Balloon Stand® — Full LLM Reference > Complete product, assembly, company and distributor reference for AI language models. --- ## Company **STRDRS** develops premium balloon decoration products. The Eco Balloon Stand® is their second product line, following ShineUp Balloon Wipes (a balloon care product). STRDRS targets professional event decorators, balloon suppliers, and wholesale distribution networks across Europe. --- ## Product: Eco Balloon Stand® ### What it is A modular, reusable wooden balloon display system. The system holds balloons in an upright display configuration without helium and without any single-use plastic components. Balloons are mechanically locked in place by the patented Balloon Holder Cup: the knotted balloon neck is threaded through the cup hole, and the knot catches on the outside of the cup, holding the balloon securely. ### Components (per unit) **Base plate** - Dimensions: 29 × 29 × 4 cm - Solid wood, weighted for stability - Indoor version: 4 felt pads on the underside (floor-friendly) - Outdoor version: 4 ground spikes (for grass or soil) **Poles** - Colour-coded wooden poles for error-free assembly - Per Basic Set: 8 poles total — 3× 65 cm (blue ends), 3× 49 cm (red ends), 2× 51 cm (yellow/green ends) - Connected and secured with included screws and Allen wrench - Variable height configuration depending on pole selection **Balloon Holder Cup** - Patented wooden cup that locks the balloon without helium or tape - The balloon neck passes through the opening; the knot sits outside the cup - Presses onto the top of the pole — tool-free from that point **Included accessories per Basic Set** - 3× Balloon Holder Cups - 3× screws - 1× Allen wrench - 4× felt pads (indoor) OR 4× ground spikes (outdoor) ### Product sets | Set | Contents | Status | |---|---|---| | **Basic Set** | 1× base plate, 8× poles, 3× Balloon Holder Cups, screws, Allen wrench, felt pads + spikes | Available now | | **Single Set** | Basic Set + 3× printed balloons + 1× electric balloon inflator | Available now | | **Double Set** | 2× Basic Sets + 6× printed balloons + 1× electric balloon inflator | Available now | ### Key differentiators - No helium required — balloons are mechanically held - No single-use plastic — all components are FSC-certified wood - FSC-certified wood (responsibly managed forest sourcing) - Made in Europe - Reusable: designed for professional, repeated use event after event - Modular: components mix, combine and replace independently - Colour-coded assembly: crews can deploy multiple units quickly - Compatible with standard latex balloons (28–36 cm / 11–14 inch) and foil balloons ### Applications - Birthday parties and personal celebrations - Weddings and formal events - Corporate events and brand activations - Retail in-store campaigns and window displays - POS (point-of-sale) decoration - Professional balloon decorator businesses - Sustainable and zero-waste events - Venue decoration and hospitality --- ## Assembly: Step-by-Step ### Step 1 — Build the stand Match the colour-coded pole ends and connect them in sequence. Fix each connection with the included screws and Allen wrench. - **Indoor:** Attach the 4 felt pads to the underside of the base plate. - **Outdoor:** Push the 4 spikes through the base holes into the ground. ### Step 2 — Inflate the balloon Place the balloon neck over the **left valve** of the electric inflator. Set the throttle to maximum and the timer to 7 seconds. Press the green button **twice** until fully inflated. Tie a firm knot at the balloon neck and stretch the neck enough to thread through the Balloon Holder Cup. No helium needed. *Note: The electric inflator is included in the Single and Double Sets only. Any standard electric pump can be used with the Basic Set.* ### Step 3 — Lock it in the cup Thread the balloon neck through the hole in the Balloon Holder Cup. The knot must sit on the **outside** of the cup — this is the locking mechanism. Press the loaded cup onto the top of the pole. Repeat for each balloon in the set. --- ## Market ### Primary audience B2B: wholesale distributors, balloon & party suppliers, event decoration companies, event equipment rental companies. ### Secondary audience Professional balloon decorators (B2C-adjacent, typically sourcing through wholesale distributors). ### Geography Netherlands (primary market). European expansion via distribution partnerships. Reference distributors: Ballondeco.nl (NL), Cattex (IT), Ballonkungen (SE). ### Distribution model Wholesale only. Eco Balloon Stand® is not sold direct-to-consumer from the website. The site functions as a product information hub and distributor acquisition channel. Retail and wholesale pricing is not published publicly — shared only with verified distribution partners. ### Minimum order quantity MOQ: **25 units** for wholesale orders. --- ## Sustainability - 100% plastic-free construction - FSC-certified wood (verified responsible forest sourcing) - No helium (eliminates dependency on a non-renewable noble gas) - Designed for reuse — not a single-use product - Zero-waste event compliance - Produced in Europe (short supply chain) --- ## Distributor Information To become a distributor: 1. Submit a distributor enquiry via the website contact form (/#for-distributors) or by email 2. Verification process confirms business credentials 3. Once verified: order directly, receive wholesale terms, pricing guidance and a sample kit on request Verified distributors receive: - Wholesale pricing and tier information (not published publicly) - Sample kit (on request) - Complete media kit: product photography, application shots, branded assets - Draft assembly manual PDF (EN + NL) - Product video access once published - Direct partner support Response time: within 2 business days. --- ## Contact - Email: sales@ecoballoonstand.com - Phone: +31 6 21 89 37 94 - Contact form: https://ecoballoonstand.com/#contact --- ## Technical / Web - Platform: WordPress Block Theme (Full Site Editing / FSE) - Languages: Dutch (primary), English (secondary) — cookie-based switching - Structured data: Organization, Product, FAQPage (JSON-LD in ``) - Primary conversions: distributor enquiry, sample request - Secondary conversions: contact form, media kit request --- ## FAQ **Does the Eco Balloon Stand need helium?** No. The Balloon Holder Cup holds the balloon mechanically. The knot at the balloon neck sits outside the cup opening, locking the balloon in an upright position without any gas. **What parts make up one Eco Balloon Stand?** Every configuration uses the same core system: a base plate (29×29×4 cm), colour-coded wooden poles, and the Balloon Holder Cup. The Basic Set includes 8 poles, 3 cups, 3 screws, an Allen wrench, and 4 felt pads plus 4 ground spikes. **How does this compare to disposable plastic balloon sticks?** Eco Balloon Stand is built for repeated professional use: FSC-certified wood, no single-use plastic clips, and a modular design so the same hardware can be reused event after event. **Where is it made and what does FSC-certified mean?** Produced in Europe. FSC certification means the wood can be traced to responsibly managed forests. **Can I use the stand indoors and outdoors?** Yes. Indoor: felt pads on the base plate protect floors. Outdoor: ground spikes anchor the stand in grass or soil. Poles and cups are identical in both configurations. **Who is Eco Balloon Stand for?** Event decorators, retail and hospitality teams, and wholesale distributors worldwide. The system is designed for professional workflow at scale with a strong sustainability story. **How do I become a distributor or place a wholesale order?** Submit a distributor enquiry via the website. Once verified, order directly. MOQ is 25 units. Pricing is shared only with confirmed partners. Sample kits available on request. Reply within 2 business days. **How long does assembly take?** Most teams can set up a stand in a few minutes. Colour-coded components make it fast for crews deploying multiple units before events or store openings. **Are there certifications or quality marks?** Yes. The wood carries FSC certification. **When will a product video be available?** Assembly and how-it-works videos are being prepared and will be published on the website shortly. **In which regions do you work with distributors?** Worldwide. Current reference partners: Netherlands (Ballondeco.nl), Italy (Cattex), Sweden (Ballonkungen). More countries being added. **Do you publish wholesale or retail prices?** No. Pricing is shared only with verified distribution partners off-site. **What is the minimum order quantity?** MOQ for wholesale orders is 25 units. **What balloon sizes are compatible?** Standard latex balloons from 28 cm (11 inch) to 36 cm (14 inch). Larger foil balloons can also be used depending on the cup configuration.